Power Amplifiers
Filter by brand
Behringer EUROPOWER EP2000
Professional 2000W Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology
Product Features
- 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- Switchable limiters offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Clip LEDs to monitor performance
- XLR and 1/4″ TRS input connectors for compatibility with any source
- Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
- Selectable low-frequency filters remove damaging infra-sound frequencies
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- High-current toroidal transformer for ultra-high transient response and absolute reliability
- “Back-to-front” ventilation system including air filter for reliable operation
- “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
Behringer EUROPOWER EP4000
Professional 4000 W Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology
Product Features
- 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- Switchable limiters offer maximum output level with reliable overload protection
- Detented gain controls for precise setting and matching of sensitivity
- Precise Power, Signal and Clip LEDs to monitor performance
- XLR and 1/4″ TRS input connectors for compatibility with any source
- Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
- Selectable low-frequency filters remove damaging infra-sound frequencies
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- High-current toroidal transformer for ultra-high transient response and absolute reliability
- “Back-to-front” ventilation system including air filter for reliable operation
- “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
Behringer KM1700
Professional 1700-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response)
Crown XLS 2000
Two-channel, 650W @ 4Ω Power Amplifier
Features
- XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
- Integrated PureBandâ„¢ Crossover System for better performance and control
- Peakxâ„¢ Limiters provide maximum output while protecting your speakers
- XLR, 1/4″, RCA inputs provide outstanding flexibility
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Peavey CS 1400
The Peavey CS 1400 – Stereo Power Amplifier (500W per Channel at 4 Ohm) is a 2RU rack mountable amp designed for live sound reinforcement applications such as for parties, clubs, houses of worship and concerts. The amplifier is capable of outputting 1400W bridged at 4Ω, 700W per channel at a 2Ω, 500W per channel at 4Ω, and 330W per channel at 8Ω with a frequency response of 10 to 25,000 Hz.
Peavey CS 2000
The Peavey CS 2000 – Stereo Power Amplifier (760W per Channel at 4 Ohm) is a 2RU rack mountable amp designed for live sound reinforcement applications such as for parties, clubs, houses of worship and concerts. The amplifier is capable of outputting 2150W bridged at 4Ω, 1075W per channel at a 2Ω, 760W per channel at 4Ω, and 490W per channel at 8Ω with a frequency response of 10 to 25,000 Hz.
Peavey CS 3000
The Peavey CS 3000 – Stereo Power Amplifier (1025W per Channel at 4 Ohm) is a 2RU rack mountable amp designed for live sound reinforcement applications such as for parties, clubs, houses of worship and concerts. The amplifier is capable of outputting 3050W bridged at 4Ω, 1500W per channel at a 2Ω, 1025W per channel at 4Ω, and 650W per channel at 8Ω with a frequency response of 10 to 100,000 Hz.
Peavey CS 4000 2U
The CS4000 Professional Power Amplifier by Peavey is a 2RU rugged unit that incorporates DDT (Distortion Detection Technique) circuitry designed to deliver trouble-free operation into loads as low as 2Ω, protect drivers and ensure sonic integrity even under difficult loads and power conditions. It features tunnel-cooled heat sinks and dual-speed DC fans which lower the overall operating temperature, resulting in longer output transistor life. The Peavey CS4000 amplifier features power points up to 4000W.
Peavey CS 4000 3U
FEATURES
- Distortion Detection Technique (DDT)
- Line voltage selector switch
- High volume cooling fan
- 100 Hz, 24dB/octave, Linkwitz-Riley Crossover
- Front panel LEDs: DDT, Signal,Thermal Protect and Power
- Switchable 2nd order 40Hz high pass filter
- Packed Length: 26″ (66.04 cm)
- Packed Width: 25″ (63.5 cm)
- Packed Height: 9″ (22.86 cm)
Peavey CS 4080
The Peavey CS 4080HZ – Stereo Power Amplifier (2040W per Channel at 4 Ohm) is a 2RU rack mountable amp designed for live sound reinforcement applications such as for parties, clubs, houses of worship and concerts. The amplifier is capable of outputting 4080W bridged at 4Ω, 2040W per channel at 4Ω, and 1250W per channel at 8Ω with a frequency response of 10 to 100,000 Hz.
Peavey CS 6000 3U
FEATURES
- Distortion Detection Technique (DDT)
- Line voltage selector switch
- High volume cooling fan
- 100 Hz, 24dB/octave, Linkwitz-Riley Crossover
- Front panel LEDs: DDT, Signal,Thermal Protect and Power
- Switchable 2nd order 40Hz high pass filter
- Packed Weight: 86.22 lb (39.1 kg)
- Packed Length: 26″ (66.04 cm)
- Packed Width: 25″ (63.5 cm)
- Packed Height: 9″ (22.86 cm)
Peavey IPR2 5000
Features
- Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz
- Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz
- Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz
- 2 channel independent, fourth-order Linkwitz-Riley crossovers
- DDT protection
- Revolutionary IPR class D topology
- Detented input controls
- Combination XLR 1/4″ inputs
- 4 pole twist lock output connectors
- Ultra-light weight
- Individual signal pass 1/4″ jacks on each channel
- LED illuminated
- Standby, LED power present indication
Peavey IPR2 7500
Features
- Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz
- Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz
- Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz
- 2 channel independent, fourth-order Linkwitz-Riley crossovers
- DDT protection
- Revolutionary IPR class D topology
- Detented input controls
- Combination XLR 1/4″ inputs
- 4 pole twist lock output connectors
- Ultra-light weight
- Individual signal pass 1/4″ jacks on each channel
- LED illuminated
- Standby, LED power present indication
Proel PA AUP4250S
4 x 250W digital Power amplifier , 4 independent 70V/100V/8Ω/4Ω Outputs, 4 independent Balanced inputs with level control, dedicated Priority balanced input, Master control and independent Low/High Tone control for each channel, PA-HF filter each channel, SMPS (switch mode power supply), 2U Rack mount
Wharfedale Pro CPD1000
Key Features
|
|
Wharfedale Pro CPD1600
Key Features
|
|
Wharfedale Pro CPD2600
Key Features
|
|
Wharfedale Pro CPD3600
Key Features
|
|
Wharfedale Pro CPD4800
Key Features
|
|
Wharfedale Pro DP-2200
Key Features
|
|
Wharfedale Pro DP-4035
Key Features
Â
|
|
Wharfedale Pro DP-4100
Key Features
Suitable for professional live sound reinforcement or fixed installations, the 4-channel DP-4100 delivers extreme power from a light weight box. Its advanced switch mode power supply and super-efficient Class D topology delivers high power with low distortion. With 4 discrete channels and multiple operating modes its simple to configure into the most complex of installations or touring rigs.
|
|
Wharfedale Pro MP 1800
Key Features
|
|
Wharfedale Pro MP 2800
Key Features
|
|
